top of page
R200EA.png

R200EA FACE FRAME ASSEMBLY EASEL

Designed for pocket joinery face frame construction. The R200EA provides the most efficient and economical method of frame joinery. Flush and tight joint construction is provided on all types of wood. The elimination of dowel boring, dowel and glue insertion, clamping time and joint misalignment provides up to 50% reduction in frame construction. The ability to disassemble a frame and reposition a joint without the loss of material adds to the systems productivity. The design of the pocket borer eliminates the need for glue to be applied to the joint.

For the assembly of wooden cabinet face frames. This heavy duty table insures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the screw pocket.

Technical Data and Specifications

  • 5’x12′ Face Frame Table

  • Hold Down Beam with (5) Adjustable Hold Down Cylinders

  • 45 Degree Vertical Easel

  • Squaring Bars on Right, Left, and Bottom Sides

  • 1″ Thick Formica Surfaced Table

  • 3″ I-Beam Easel Frame

  • Screw Driver Not Included

  • Designed and Manufactured in the USA

 

Additional options for this machine include:

  • R200A – Additional Beam Assembly

R210EA.jpg

R210E/A FACE FRAME ASSEMBLY TABLE

  • 5’x12′ Face Frame Table

  • 5-Cylinder Clamp Arm

  • Open Back For 60″ Plus Frame Height

  • 45 Degree Vertical Easel

  • Squaring Bars on Right, Left, and Bottom Sides

  • 1″ Thick Formica Surfaced Table

  • 3″ I-Beam Easel Frame

  • Hold Down Beam with (5) Adjustable Hold Down Cylinders

  • Screw Driver Not Included

  • Designed and Manufactured in the USA

 

Additional options for this machine include:

  • R210A – Additional Beam Assembly

 

For the assembly of wooden cabinet face frames. This heavy duty table insures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the screw pocket

R215EA.jpg

R215E/A FACE FRAME ASSEMBLY TABLE

  • 5’x8′ Face Frame Table

  • 3-Cylinder Clamp Arm

  • 45 Degree Vertical Easel

  • Squaring Bars on Right, Left, and Bottom Sides

  • 1″ Thick Formica Surfaced Table

  • 3″ I-Beam Easel Frame Hold Down Beam

  • with (3) Adjustable Hold Down Cylinders

  • Designed and Manufactured in the USA

​

Additional options for this machine include:

  • R215A – Additional Beam Assembly

​

For the assembly of wooden cabinet face frames. This heavy duty table insures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the screw pocket

R250EA.jpg

R250EA FRAMEMASTER FACE FRAME & DOOR ASSEMBLY EASEL

The R250EA is designed for all types of frame and door construction. Joinery such as screw pockets, glue and dowel, mortise and tennon, nails, staples and biscuit are all easily utilized by the system. The large assembly easel allows for assembly of cabinet and furniture face frames, cabinet and architectural doors, skylight frames, wainscoting and any other type of frames. Multiple workstations are provided to allow for the simultaneous assembly of different types of joinery.

 

The R250EA is a table for both the assembly of 5 piece doors, and the assembly of wooden cabinet face frames. This heavy duty table insures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the components during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the face frame screw pocket.

  • 6’x12′ Face Frame and Door Assembly Table

  • (5) Cylinder Clamp Arm

  • (10) Universal Clamp Cylinders & Manifold

  • Foot Treadle

  • (4) Material Hold-down Dogs

  • (3) Adjustable Material Positioning Stops

  • Designed and Manufactured in the USA

Additional options for this machine include:

  • U300E05 – Additional Clamp Cylinder

R275EA.png

R275E/A MINI-FRAMER FACE FRAME ASSEMBLY TABLE

  • 4’x8’ Face Frame Table

  • Clamp Arm with (3) Hold Down Cylinders

  • (4) Universal Clamping Cylinders and Manifold

  • 45 Degree Vertical Easel

  • Squaring Bars on Right and Left Sides

  • Perforated Steel Table Top

  • Manifold with 1/4″ NPT Regulator/Gage

  • Designed and Manufactured in the USA

Additional options for this machine include:

  • R275A – Additional Beam Assembly

  • U300E05 – Additional Clamp Cylinder

 

The Ritter R275E/A Mini-Framer Face Frame Assembly table is versatile, heavy-duty and user-friendly. With a clamp arm and Ritter’s popular side-clamping cylinders, the R275E/A offers the best of both worlds. With a total of 7 cylinders, this machine will make your assembly a breeze!

bottom of page