R2061.jpg

R2061 6° LOW ANGLE POCKET CUTTER

Standard Features:

  • 6° Low angle

  • PLC controlled cycle

  • Foot pedal operated

  • Adjustable Material Stops

  • Up to 2″ thick material

  • Cycle Time: 1.75 – 2 Sec

  • Tooling Included

 

Shipping Weight: 300 LBS
Shipping Dimensions: 38″ x 25″

 

Additional options for this machine include:

  • 48″ Wide Table

  • R2063 – 3-Phase 230/460 Volt

 

The R2061 is used for routing a single pocket hole for cabinet face frame assembly. It is part of the R200 assembly system that includes the R200E/A and is sold separately.

Technical Data and Specifications:

  • Router Bit: 3/8” Solid Carbide, Rough Mill

  • Drill Bit: 9/64” Brad and Spur TiN-Coated Bit

  • Router: 24,500 RPM, 11 A, 1.75 HP

  • Drill: 31,000 RPM, 4.5 A, 7/8 HP

  • Electrical: 110V 15A

  • Air: 2 CFM at 80 – 100 PSI

  • Work height: 36″

  • Footprint: 27.75″ x 20.5″

  • Table Area: 15.75″ x 23.75″

  • Dust Port: 4″

R2063_edited.jpg

R2063 6° LOW ANGLE POCKET CUTTER

Standard Features:

  • 6° Low angle

  • PLC controlled cycle

  • Foot pedal operated

  • Adjustable Material Stops

  • Up to 2″ thick material

  • Cycle Time: 1.75 – 2 Sec

  • Tooling Included

 

Shipping Weight: 300 LBS
Shipping Dimensions: 38″ x 25″

 

Additional options for this machine include:

  • 48″ Wide Table

  • R2061 – 1-Phase 120 Volt

 

The R2061 is used for routing a single pocket hole for cabinet face frame assembly. It is part of the R200 assembly system that includes the R200E/A and is sold separately.

Technical Data and Specifications:

  • Router Bit: 3/8” Solid Carbide, Rough Mill

  • Drill Bit: 9/64” Brad and Spur TiN-Coated Bit

  • Router: 24,000 RPM, 8 A, 2 HP

  • Drill: 22,000 RPM, 0.9 HP, 5.5 CFM (Intermittent)

  • Electrical: 230V, 3Ø, 10A

  • Air: 5.5 CFM at 80 – 100 PSI

  • Work height: 36″

  • Footprint: 27.75″ x 20.5″

  • Table Area: 15.75″ x 23.75″

  • Dust Port: 4″

R200T.jpg

R200T – SINGLE SPINDLE COUNTERBORE TUB

Designed for pocket joinery face frame construction. The machine provides the most efficient and economical method of frame joinery. Flush and tight joint construction is provided on all types of wood. The elimination of dowel boring, dowel and glue insertion, clamping time and joint misalignment provides up to 50% reduction in frame construction. The ability to disassemble a frame and reposition a joint without the loss of material adds to the systems productivity. The design of the pocket borer eliminates the need for glue to be applied to the joint.

  • 1.5 HP Spindle Drive Motor, TEFC

  • Manual Controls, 1-Phase, 110 V, 60 Hz

  • Foot Actuated Boring Cycle

  • 14 Degree Single Spindle

  • 6,100 RPM Spindle Speed

  • Ball Bearing Collet Guide Bushing Block

  • 24” x 30” Table Area

  • Adjustable Fence with (2) Stops

  • Tooling Included

  • Designed and Manufactured in the USA

 

Additional options for this machine include:

  • R200T3 – 1.5 HP 3-Phase 230/460 Volt

R220T – DOUBLE SPINDLE COUNTERBORE TUB

  • 1.5 HP Spindle Drive Motor, TEFC

  • 1” Spindle Centers

  • Manual Controls, 110 V, TEFC

  • Foot Actuated Boring Cycle

  • Tooling included

  • 14 Degree Double Spindle

  • 6,100 RPM Spindle Speed

  • Ball Bearing Collet Guide Bushing Block

  • 24” X 30” Table Area

  • Adjustable Fence with (2) Stops

  • Designed and Manufactured in the USA

 

Additional options for this machine include:

  • R220T3 – 1.5 H.P. 3-Phase 230/460 Volt

 

This machine is used for drilling a double pocket hole – hole spacing of 1″ – for cabinet face frame assembly. No other machine in the marketplace compares to the R220T for its durability and dependability. Also available in a tighter spacing pattern – just ask!

R220T.jpg