R130.png

R130 HORIZONTAL BORER

  • (1) Single Spindle Head

  • 7/16-14 Female Threaded Collet

  • 1 H.P. Spindle Drive Motor, TEFC

  • 0-2″ Adjustable Boring Depth

  • 8″ X 20″ Work Table Area

  • (4) Material Positioning Stops

  • Wired 1-Phase 110 Volt, 60 Hz.

  • Foot Actuated Boring Cycle

  • Tooling Not Included

  • Designed and Manufactured In The USA

  • Crated Dimensions: 38″ X 38″ X 55″ and 381 Lbs

 

The Ritter R130 is a robust, single spindle horizontal borer, known for being a workhorse in the shop. The many uses of this machine include stile and rail drilling, furniture doweling, line boring, table pin locating, and other functions for the clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.

R131 TRIPLE SPINDLE BORER

  • 3/4 HP Spindle Drive Motor, TEFC

  • (1)-Triple Spindle Gear Head

  • 1″ Spindle Centers on Gear Head

  • 7/16-14 Female Threaded

  • Collets (2) L/H (1) R/H

  • 0-2″ Adjustable Boring Depth

  • 8″ X 20″ Work Table Area

  • (4) Material Positioning Stops

  • 3.00″ Bore Clamping Cylinder

  • Manual Motor Controls

  • Wired 1-Phase 110 Volt, 60 Hz.

  • Foot Pedal Actuated Boring Cycle

  • Tooling Not Included

  • Designed and Manufactured in the USA

The Ritter R131 is a robust, triple spindle horizontal borer, known for being a workhorse in the shop. The many uses of this machine include stile and rail drilling, furniture doweling, line boring, table pin locating, and other functions for the clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.

R131.png
R132.png

R132 TRIPLE SPINDLE BORER

  • (1)-Triple Spindle Gear Head

  • 32mm Spindle Centers On Gear Head

  • 10mm Bored Female Collets With Set Screw Lock

  • 1 H.P. Spindle Drive Motor, TEFC

  • 0-2″ Adjustable Boring Depth

  • 8″ X 20″ Work Table Area

  • (4) Material Positioning Stops

  • 3.00″ Bore Clamping Cylinder

  • Wired 1-Phase 110 Volt, 60 Hz.

  • Foot Pedal Actuated Boring Cycle

  • No Tooling Included

  • Designed and Manufactured In The USA

  • Crate Dimensions: 38″ X 38″ X 55″ and 381 Lbs

The Ritter R132 is a robust, triple spindle horizontal borer, known for being a workhorse in the shop. The many uses of this machine include stile and rail drilling, furniture doweling, line boring, table pin locating, and other functions for the clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.

R8023 HEAVY DUTY TWO SPINDLE

HORIZONTAL BORER

  • (2) 1 HP Spindle Drive Motors, TEFC

  • Right Angle Tee Fence Set

  • (2)-Single Spindle Boring Head

  • 2″-11″ Adjustable Spindle Centers

  • 7/16-14 R/H Female Threaded Collets

  • 0-3″ Adjustable Boring Depth

  • 0-2″ Spindle Height Adjustment

  • 36″ Fixed Work Table Height

  • 12″ X 24″ Machined Steel Work Table

  • (2) 2.00″ Bore Clamping Cylinder

  • (2) End Boring T-Fences

  • Manual Motor Controls

  • Wired 3-Phase 220/440 Volt, 60 Hz.

  • Foot Pedal Actuated Boring Cycle

  • Tooling Not Included

  • Designed and Manufactured in the USA

The Ritter R8023 is a robust, two spindle, twin motor horizontal borer, known for being a workhorse in the shop. The many uses of this machine include stile and rail drilling, furniture doweling, line boring, table pin locating, and other functions for the clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.

R8023.jpg
R8043.jpg

R8043 FOUR SPINDLE HORIZONTAL BORER

  • (2) 1 HP Spindle Drive Motors

  • Right Angle Tee Fence Set

  • (2)-Double Spindle Gear Head

  • 1″ Spindle Centers On Gear Head

  • 1-1/4″-11″ Adjustable Spindle Centers

  • 7/16-14 R/H Female Threaded Collets

  • 0-3″ Adjustable Boring Depth

  • 0-2″ Spindle Height Adjustment

  • 36″ Fixed Work Table Height

  • 12″ X 24″ Machined Steel Work Table

  • (2) 2.00″ Bore Clamping Cylinder

  • (2) End Boring T-Fences

  • Manual Motor Controls

  • Wired 3-Phase 220/440 Volt, 60 Hz.

  • Foot Pedal Actuated Boring Cycle

  • No Tooling Included

  • Designed and Manufactured in the USA

The Ritter R8043 is a robust, four spindle, twin motor horizontal borer, known for being a workhorse in the shop. The many uses of this machine include stile and rail drilling, furniture doweling, line boring, table pin locating, and other functions for the clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.

R823.jpg

R823 HORIZONTAL BORING MACHINE

  • 23-Horizontal Gear Driven Spindles

  • 32mm Spindle Centers

  • 10 Mm Bored Collets

  • (12) Right Hand, (11) Left Hand

  • 3,450 Spindle Rpm

  • 3 H.P. Spindle Drive Motor, TEFC

  • 0-2″ Adjustable Boring Depth

  • 20″ X 42″ Precision Ground Table

  • Back Fence Lip

  • (2) End Boring Fences

  • (1) 5-Ton Carriage Adjusting Jack

  • (4) 2.00″ Bore Clamping Cylinder

  • Wired 3-Phase 480 Volt, 60 Hz. (optional single-phase)

  • Foot Pedal Actuated Boring Cycle

  • No Tooling Included

  • Designed And Manufactured In The USA

  • Crate Dimensions: 54″ X 54″ X 55″ Weight: 1,485 Lbs

The Ritter R823 is a robust, 23 spindle horizontal borer, designed to be used as a supplemental borer for CNC nested based router and point-to-point borer applications, producing clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamps, and there is full adjustability of the index stops, bed height, and depth of cut.

R853.png

R853 HORIZONTAL/VERTICAL

LINE-DOWEL DRILL / DRAWER DRILL

  • Foot Actuated Drilling and Clamping Cycle

  • (13)-Spindle Gear Head

  • 32mm Spindle Centers on Gear Head

  • (7) Right Hand, (6) Left Hand

  • 10mm Bored Collets

  • 2 HP Spindle Drive Motor, TEFC

  • 0-2″ Adjustable Boring Depth Turret

  • 1/2″ – 3/4″ Thick Drawer Box Sides

  • 14″ Maximum Drawer Box Height

  • 12″ X 24″ Machined Steel Work Table

  • 34″ Work Height

  • Horizontal / Vertical Boring Fence System

  • Horizontal / Vertical Material Clamp System

  • Wired 3-Phase 230 Volt, 60 Hz.

  • Tooling Not Included

  • Designed and Manufactured in the USA

Additional options for this machine include:

  • E55 – 1.5 HP 1-Phase Motor, 220 Volt

The Ritter R853 is a robust 13 spindle horizontal borer, designed to provide for fast and accurate horizontal and vertical boring for drawer boxes. The operation sequence helps eliminate costly mistakes and rejected parts, and it helps increase production and efficiency. Ideal for drawer assembly, and other functions for the clean and accurate drilling of wood components. The machine is equipped with a universal clamping system requiring no set-up change from horizontal to vertical boring. The workpiece is held firmly against the table by a pneumatic clamps, and there is full adjustability of the index stops, bed height, and depth of cut.